Three-step food inspection and sample storage is one of the mandatory regulations of the law and is important data for food service establishments. Below, we will learn about three-step food inspection and sample storage, and the steps to guide the implementation of the three-step food inspection and sample storage regime.

What is three-step verification?
The three-step verification process is a procedure for inspecting, documenting, and archiving records to control food safety throughout the entire process, from raw material procurement, preparation, processing, distribution, storage, transportation, and serving of food at the establishment. It is also one of the important standards in operation. industrial catering service Professionalism helps ensure meal quality and minimize food hygiene risks.
Food sampling concept
Food sampling is the sampling, preservation, recording and keeping of relevant documents for food processed or provided for eating and drinking at the establishment.
Applicable objects
Food service establishments include: establishments that prepare ready-made meals; and food and beverage canteens. communal kitchen; kitchens, restaurants of hotels and resorts; restaurants.
Food sampling is applied to all dishes of meals of 30 servings or more.
Three-step verification guide
Step 1 – Check before cooking
Check information, evaluate and record imported goods before processing on form number 1. Appendix 1: three-step verification record form.

Form 1 applies to fresh and frozen foods: meat, fish, vegetables, fruits, etc.

Form No. 1 applies to dry food and prepackaged food, food additives
Step 2 – Check during food processing
Check the hygiene conditions at the facility from the time of starting to prepare and process the food until it is finished; evaluate the food after processing, clearly recording the start and end date and time of each dish in form number 2. Appendix 1: three-step food inspection form.

Step 3 – Check before eating
Check food distribution and food display areas.
Check the dishes against the meal plan.
Check tools, eating utensils, covers, and food storage.
Sensory evaluation of dishes.
Pre-meal inspection information is recorded on form number 3. Appendix 1: three-step food inspection record form.

Food sample storage device
Sample storage equipment must have a tight lid, be cleaned and sterilized before use.
Food sampling
Each dish must be stored in a separate, sealed sample container.
Time of food sampling
Feed samples are taken before starting feeding or before transporting to another location and feed samples must be stored immediately after taking.
Food sample amount
Solid food; ready-to-eat vegetables and fruits: minimum 100 grams.
Liquid food: minimum 150 ml.
Information on food sample storage is recorded on sample label number 4. Appendix 2: food sample storage form and fixed to food sample storage device.

Food sample storage temperature
Food samples are stored separately from other foods, the storage temperature for food samples is from 2℃ to 8℃.
Food sample retention time
Food samples must be stored for at least 24 hours from the time of sampling. In addition, if food poisoning is suspected or required by a regulatory agency, the stored sample must not be destroyed until further notice.
Time to collect and destroy stored samples according to form number 5. Appendix 2: Sample form for storing food samples and destroying stored food samples.

For the form, you can refer to Decision 1246/QD-BYT issued on March 31, 20217 by the Ministry of Health.